Alpha Marketing, New Delhi

Alpha Marketing, New Delhi

Nariana Industrial Area, New Delhi, Delhi

Insulation Foaming

Providing you the best range of graco reactor h-xp 2 component sprayers and insulation foaming two component sprayers with effective & timely delivery.

Graco Reactor H-XP 2 Component Sprayers

REQUEST CALLBACK
Approx. Rs 27 Lakh / onwards per Piece

Get Best Quote

Product Details:

Minimum Order Quantity1 onwards per Piece
BrandGRACO
ColorBlue
Dynamic Power (watt)240 v
Energy SourceElectric
Gross Weight120 KG
Max Flow (litre/minute)9 LPM
Modelgraco reactor H-XP 2
Warranty3 year for Motor

Since our inception, we are supplying an outstanding quality array of Graco Reactor H-XP3 Component Sprayers. This machinery is mainly used for producing polyurethane or flexible foam, which density is 9-50 kgs/m3. Offered machinery provides the operator with a correct position to operate the machine. Also, the machinery supports the instrument panel and the mixer. Besides, it is an anti-skid surface foam delivering machinery. Apart from everything, this machinery can be purchased by the clients at cost effective rates from us.

Features:
  • Easy to adjust and monitor variables
  • Real-time information during foam production
  • Save and secure production environment

 

Specifications:

  • Density: 9-50 kgs/m3
  • Model: H-XP3
  • Brand: Graco

Yes! I am Interested

Insulation Foaming Two Component Sprayers

REQUEST CALLBACK
Approx. Rs 23 Lakh / Piece

Get Best Quote

Product Details:

Minimum Order Quantity1 Piece
BrandGraco
two Component spray Machine2300000

The Insulation Foaming Component Sprayers that gives you the reliability you expect on the job site. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.

Specifications:
Reactor A-25 Plural Component Proportioner
Maximum Fluid Working Pressure14 Mpa, 138 bar
Maximum Air Supply Pressure0.9 Mpa, 9 bar
Maximum Air Working Pressure550 kPa, 5.5 bar
Pressure Ratio25:1
Air consumption with 02 tips at 1500 psi stall pressure0.8m³/min
Machine Maximum Power with hose9000 Watts
Amperage Requirement (Full Load Peak)*40 amps @ 230 V, 1 Phase; 32 amps @ 230 V, 3 Phase; 18.5 amps @ 380 V, 3 Phase
Maximum Heater Fluid Temperature88°C
Maximum Hose Fluid Temperature82°C
Maximum Ambient Temperature49°C
Maximum Output11.4 kg/min
Output Per Cycle (A and B)0.095 LTR/cycle
Heater Power6000 Watts
Horse Power2790 Watts
Sound Pressure (see NXT air motor manual)70.2 dB(A)
Sound Power (see NXT air motor manual)80.1 dB(A)
Viscosity Range250–1500 centipoise (typical)
Maximum Fluid Inlet Pressure2.1 Mpa, 21 bars or 15% of output pressure
Fluid Inlet/Strainer Filter20 mesh standard
Air inlet Filter Mesh40 Micron
Component B (Resin) Inlet3/4 not(f) swivel
Component A (Isocyanate) Inlet3/4 not(f) swivel
Recirculation/Block Hose Connections(A) side: #5 JIC (m), Resin (B) side: #6 JIC (m)
Maximum Heated Hose Length ***210 ft of 3/8 ID
Weight140.6 kg
Wetted PartsCarbon steel, stainless steel, chrome, aluminum, Fluoroelastomer, PTFE, nylon
Voltage Requirement Tolerance Range (50/60 Hz)
200–240 V AC Nominal, 1–Phase195–253 V
200–240 V AC Nominal, 3–Phase Delta195–253 V
350–415 V AC Nominal, 3–Phase Wye (200–240 V as Line-to-Neutral)338–457 V
*Full load amps with all devices operating at maximum capabilities with 210 ft (64.1 m) of hose.
***210 ft (64 m) of the heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose may be used but will have 25% less heat capacity.

Yes! I am Interested

View PDF
X
 





Explore More Products